Ambersil Acrylic Paint is an acrylic based coating - delivered in an aerosol can available in a wide variety of RAL colours.
Features
- Fast drying
- Good hardening
- Excellent flexibility
- High UV resistance
- Good adhesion to:
- Metal
- Wood
- Glass
- Paint-able Plastics
- Concrete & Stone
- Does not contain any heavy metals
- Good opacity masks surface imperfections
- Long lasting - high gloss finish
Applications
Ambersil Acrylic Paint is recommended as a protective coating for the repair of lacquered surfaces. Ambersil Acrylic Paint may also be used as a high quality paint for a wide variety of applications in the following areas:
- Industry
- Automotive
- Home and garden
Directions
- Shake aerosol can well for at least two minutes after agitator ball is free
- Repeat frequently during use
- Apply to a clean - degreased dry surface for best results. Remove rust and scale with a wire brush. Use an anti-corrosion primer such as Ambersil Zinc Primer or Ambersil Cold Galvanise to provide maximum corrosion resistance and durability
- Use the can in an upright position
- Apply in light - even coats - best results are obtained with 2 3 lighter rather than 1 heavy coat. Additional coats can be applied after 3 - 5 minutes and within 30 minutes
- When spraying is finished - clear aerosol valve by turning can upside down and press button until only propellant escapes
- Do not use on energised equipment
- Use in well ventilated area
- Drying Time (20C 50%RH)
- Dust Free: < 10 min
- To Touch: < 20 min
- To Handle: < 60 min
- Over-coatable: after 5 min
- Adhesion (Gt) : 0 - 1
Storage:
The product may be stored at normal ambient temperatures and has a shelf life of not less than 120 months with correct storage. Aerosols should always be stored below 50°C - away from direct heat and naked flame.