A fast drying protective primer for all metal surfaces. Formulated with modified alkyd resin and anti-corrosion pigments - Ambersil Red Oxide Primer protects against rust and provides additional anti-corrosion performance for topcoats.Ideal for use on structural steel and beams.

Features:

• Fast drying
• Slows down rust by inhibition and complex building
• Ensures better topcoat adhesion and coverage
• Can be welded through
• Paint-able with all one-component paints - after 1 hour drying time
• Saves pre-paint time by quickly filling hairline cracks and sLight imperfections
• Strong adhesion on degreased - bare metal surfaces
• Surface preparation (e.g. by abrasion) may be needed for oxidised or galvanised surfaces
• Lead and chromate free
• No chlorinated and no aromatic solvents

• Car body work
• Boat fittings
• Farm machinery and equipment
• Steel building elements
• Metal windows
• Chassis and frames
• Seams
• Spot welds

• Shake aerosol can well for one minute after agitator ball is free
• Repeat frequently while using
• Apply to a clean - degreased dry surface for best results
• Remove rust and scale with a wire brush
• Apply in Light - even coats;
• Best results are obtained with 2 Lighter rather than 1 heavy coat at a distance of 20cm
• Additional coats can be applied after 15-20 minutes
• When spraying is finished - clean aerosol valve by turning can upside down and press button until only propellant escapes
• If clogging occurs - remove button and clean orifice with fine wire
• Do not use on energised equipment
• Use in well ventilated area
• Drying time depends on the ambient temperature - the humidity and primer thickness

• Appearance : Dark Red
• Resin Type : Epoxy Modified Alkyd
• Coverage (30 m - dry) : 1.25 to 1.75m2
• Application Conditions
• Minimum Ambient Temperature : 5C
• Minimum Surface Temperature : 30C
• Drying Times
• Dust Dry : 10-20 minutes
• To Touch : 30 minutes
• To Handle Complete Curing : 16 hours
• Heat resistance : 110C
• Packaging: : 400ml aerosol