Concrete should be at least 28 days old (applying a coating onto concrete less than 28 days old could cause failure of the product).

All oils, grease, dirt, etc. must be removed using a suitable solvent or aqueous de-greaser solution.

All old coatings must be removed (this can be achieved by grit/shot blasting, scabbling or scarifying).

If the surface is not sufficiently rough to ensure a suitable key or where the surface of the concrete is weak the concrete must be etched using a suitable acid etch system if grit/shot blasting cannot be used.

Porous surfaces such as concrete and wood should be primed using SAFE STEP® Non-Metal Primer to seal the surface (metal surfaces should be primed using SAFE STEP® Primer).

• High performance safety coating is easy to apply and offers optimum adhesion and slip resistance to metal, concrete and timber surfaces.
• Ideal applications include loading bays, vehicular ramps and all areas subject to heavy traffic.
• Can be applied to any clean, dry surface by hard roller, trowel or spray.
• Resists most acids, alkalis, solvents, grease, oils and salt water.