6 Piece Set, Carbide tipped Annular Cutters, Weldon Shank, Drill Depth 55mm, Hard Line
Properties:
- Available in diameter 12-150mm.
- Available in cutting depths 40mm, 55mm, 80mm and 110mm.
- Simply the world's largest stock range of carbide tipped annular cutters.
- Karnasch carbide tipped annular cutter (Hard-Line) are made with a conical helix for clean chip flow and highest cutting ability even with difficult material.
- Karnasch carbide tipped annular cutter (Hard-Line) are exclusively equipped with Sandvik carbide teeth.
- Our opinion is: only the best carbide is good enough for Karnasch annular cutter
- The Karnasch carbide tipped annular cutter (Hard-Line) are made in an elaborate pre-/intermediate-/after-cutting geometry. This results in: clatter free, silent and easy cutting with highest lifetimes.
- Besides maximum cutting capacity in all kind of steels provide only carbide tipped annular cutters: Drilling in hardened steel up to 40 Rockwell (HRC) and strength of 1400 N
- Drilling in all sorts of stainless steel
- Drilling in most difficult alloys (Hardox/Inconel/Titan)
- Drilling also excellent in all non-ferrous material such as alu, copper, brass and similar.
- WELDON-SHANK 19/32mm (3/4 inch+1.1/4 inch
Contents:
- 6 carbide tipped annular cutters 201316
- drill depth 40mm
- Weldon shank 19mm (3/4)
- 1 pc each Diameter 14, 16, 18, 20, 22, 26mm
- 2 ejectors pin 6,34x102mm, for Diameter 12 - 17mm
- 2 ejectors pin 7,98x105mm, for Diameter 18 - 26mm
For sets/displays, other content possible.