MP100 Multi Purpose Spray Adhesive is a fast drying - strong adhesive.
ADVANTAGES
- Original Formulation
- Fast Tack
- Ideal where instant contact and bonding is required
- Provides high-strength permanent bonds
- Variable actuator for maximum control and economy
APPLICATIONS
MP100 Multi Purpose Spray Adhesive will provide quick - strong bonds in many areas:
- Carpets & Flooring
- Chipboard and Concrete
- Insulation Materials
- Canvas and Leather
- Paper
- Wood and Cork
- Metal
- Plastics and Rubber
Apply an even coating to both surfaces to be bonded from 9 12 inches (25 30cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure.NB. May affect certain plastics. Always test a small -inconspicuous area before general use. To prevent blockages invert the can after use and spray clear the nozzle.
SPECIFICATIONS
- Appearance : Thick - gelatinous film
- Odour : Ethereal/Solvent
- SG @ 25°C : 1.16
- Pressure @ 25°C : 4 bar
- Discharge rate : 1.4g/sec
- Polymer Type : Styrene butadiene rubber
- Tack Time : Approximately 30 seconds
- Bonding Time : Maximum adhesion in 12 - 24 hours
- Temperature Range : Up to 50°C (dried film)
- Solubility : Soluble in some solvents - insoluble in water
- Flammability : Classified as extremely flammable under the EC Classification - Labelling and Packaging regulation (CLP) 1272/2008
- Packaging : 500ml aerosol
STORAGE
The product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50°C - away from direct heat and naked flame.