As a substitute for 1.1.1 - trichloroethane and other chlorinated solvents -Fastclean 200 immediately responds to the needs of users for all degreasing and surface preparation:
- When a very high evaporation speed is required
- When a high KB solvent is necessary for cleansing and cleaning heavily soiled parts
- When a hydrolysis risk must be avoided
BENEFITS
- High KB factor 106 vs 30 to 75 for other formulations. (A high KB value = more effective degreasing action)
- Extremely low surface tension half that of 1.1.1 - trichloroethane - means improved surface wetting to get under dirt more effectively
FEATURES
- Clear - low odour cleaner that is quick drying
- Fast evaporation leaves surface dry
- An excellent surface preparation for bonding - plating or painting
- Highly effective on all metals and most plastics and rubbers
- Safe to use low toxicity
TYPICAL USES
- Cleaning metallic parts
- Certain plastics
- Composites and Elastomers
- Eliminating organic and inorganic soiling before assembly
- Surface treatment
- Bonding
- Painting or Plating
- Can be used as a thinner for most organic materials
- Will clean off adhesives including:
- Liquid
- Paste or Gel anaerobic
- UV adhesives and Uncured plastics materials
- Brake disks and shoes
- Cleaning operations on electrical equipment
Always test cleaner on a small piece of plastic first. Always switch off electrical equipment and unplug from mains before using a liquid cleaner.
TYPICAL CHARACTERISTICS
- Physical Appearance : Fluid Visual
- Colour : Colourless Visual
- Odour : Light - Characteristic Smell
- Specific Gravity At 25°C : 0.742 g/ml NFT 60.101
- Boiling Point : 43°C ASTM D 1078
- Auto Ignition Temperature : >200°C ASTM E 659
- Freezing Point : <-70°C NFT 60.105
- Viscosity At 25°C : 0.766 mm2 /s ASTM D445
- Evaporation Rate (DEE=1) : 3 DIN 53.170
- KB Index : 106 ASTM D 1133
- Water Solubility : <10 ppm
- Surface Tension : 12.8 dynes/cm ASTM D 971
- Copper Corrosion - 100h at 40°C: 1a ASTM D 1616
- Discharge Rate : 1.5 g/sec
- Surface tension at 25°C /dynes/cm
- Fastclean 200 12.8 1.1.1 Trichloroethane 25.5
APPLICATION METHOD
Shake can thoroughly before use. Hold upright 30 cm (12 inches) from surface to be treated. Spray and shake alternately until area is fully covered.Always switch off electrical equipment and unplug from mains before using a liquid cleaner. Eliminate all ignition sources when using the product.
STORAGE
The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50°C - away from direct heat and naked flame.