MOULD PROTECTIVE has been specially formulated for application to mould surfaces after their use to remove any surface moisture and to protect the mould against corrosion during storage.
FEATURES
- Does not contain silicons.
- Temporary conservation of metal parts during storage
- Protects metals and alloys
- Displaces and seals out water and moisture
- Safe on all metal surfaces - does not stain
- Safe on most rubbers - plastics and coatings
- Easily moulded off
Test on sensitive or stressed materials before use.
DIRECTIONS
- Shake well before use
- Stir or mix bulk products well before use
- Repeat frequently during the application
- Use only with adequate ventilation
- Apply to a clean - dry surface
- Clean the aerosol valve by turning the can upside down and spraying until only propellant escapes
- A safety data sheet (MSDS) according to EC Regulation No. 1907/2006 Art.31 and amendments is available for all CRC products
PRODUCT DATA
- Colour: Yellow
- Density 0.740 (@ 20°C)
- Flash Point - 4 C
- Salt spray resistance active product 100 h