GALVA SHINE produces an exceptional shine and the aspect is identical to that achieved by the process of Hot Dip galvanising. A single component -coating with the lustre look of freshly galvanised articles - Ambersil Galva Shine forms a flexible protective film. Ambersil Galva Shine gives a durable - long term bright and glossy aspect.
FEATURES
- Excellent touch-up for pieces coming straight out of Hot Dip Galvanising
- Provides a closed durable film
- Unique combination of flexibility and hardness
- Adheres extremely well to galvanised surfaces
- Combines the fresh galvanised look with the convenience of an aerosol application
- Totally lead and chromate free
- No chlorinated solvents
APPLICATIONS
- Touch up of Hot Dip Galvanised pieces coming straight out of the galvanising bath
- Home and garden equipment
- Aesthetic touch up after assembly of thin plated galvanised constructions
DIRECTIONS
- Shake aerosol can very well for at least one minute after agitator ball is free
- Repeat frequently while using
- Apply to a clean - degreased dry surface for best results
- Remove rust and scale with a wire brush
- Apply in light - even coats; best results are obtained with 2 lighter rather than 1 heavy coat
- Additional coats can be applied after 5-10 minutes
- When spraying is finished clean aerosol valve by turning can upside down and press button until only propellant escapes
- If clogging occurs - remove button and clean orifice with fine wire
TECHNICAL DATA
- Appearance : Lustre and glossy aspect
- Flash Point : - 4 C
- Coverage : >1 m2/can
- Application Conditions
- Minimum Ambient Temperature : 10C
- Minimum Surface Temperature : 5C; 3C over dew point
- Maximum Humidity : 85% RH
- Drying Time
- Dry-to-Touch : <5 minutes
- Dry-to-Handle : <10 minutes
- Adhesion on Galvanized Steel (ASTM D3359) : Gt = 0
- Heat Resistance (ASTM D2485-68.) : max 150C
- Packaging : 400ml
* Typical corrosion protection results will depend mainly on surface conditions and environment. It may be several months up to over 1 year outdoors or more than 2 years indoors. The first application therefore should be checked periodically for signs of corrosion. Once the time of protection under any specific condition is determined; Ambersil Galva Shine may be re-applied at intervals to maintain protection.
STORAGE
The product may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.