RX-90 Red Oxide Anti-Rust Primer is a fast-drying protective coating for use on all metal surfaces. The modified alkyd resin binder and anti-corrosion pigments present protect against rust and provide an additional anti-corrosion layer for subsequent topcoats. RX-90 exhibits strong adhesion on degreased, bare metal surfaces and is paintable with all one-component paints after 1 hour. RX-90 can be welded through.

Features and Benefits:

• Protective anti-corrosion coating with zinc complexes to withstand harsh outdoor conditions
• Primer for ferrous metals such as bare steel and iron surfaces
• Excellent adhesion to rusty surfaces
• Fast drying
• Can be welded through

Applications:

• Industrial MRO ? structural steel, gantries, outside equipment and machinery.
• Agriculture ? tank stands, fences, gates, animal raceways in milking sheds and yards, farm machinery and tractor drawbars.
• Trade/Pro-DIY ? railings, roofing and spouting, gutters, outdoor fixtures, fences and gates.

Directions for Use:

• Use in a well ventilated area.
• Remove any rust and scale with a wire brush.
• Ensure that the surface to be coated is clean, dry and free from grease.
• RX-90 contains solids which settle during storage: shake the can vigorously until the agitator ball is free and continue shaking for a further minute.
• Shake the can periodically during application.
• Apply in light, even coats from approximately 20 cm - best results are obtained with 2 light coats rather than one heavy coat.
• Additional coats can be applied after 15 - 20 minutes.
• When spraying is finished, clean the aerosol valve by turning the can upside down and spray until only propellant escapes.
• Do no use on energised equipment.