AMBERGREASE FG1 is designed to cover a wide range of food grade applications -encompassing extremes of temperature; wet and saturated environments and heavily loaded applications and where there is a presence of dust and other contaminants. Ambergrease FG1 grease contains Extreme Pressure (EP) additives and PTFE to provide a high degree of anti-wear performance. All ingredients are FDA listed. Suitable for all plain and anti-friction bearings as well as sliding surfaces.
COST SAVING BENEFITS
- Wide performance characteristics enable standardisation to one product for most food grade applications
- Extends lubrication intervals
- Excellent anti-wear performance prolonging component life
- Exceptional degree of water resistance providing lasting lubrication and protecting against corrosion
METHOD OF APPLICATION
Ambergrease FG1 can be applied by hand - or by using a standard grease gun
- NSF Registered - Category : H1
- NSF Registration No. : 138264
- Appearance : White tacky grease
- NLGI Classification : 2
- Thickener : Aluminium complex
- Drop Point (IP 132) : >230oC
- Base Oil : Polyalphaolefin
- Base Oil Viscosity @40 oC : 47 cSt
- Oil Separation (IP121) 24 hrs @ 100 oC : 0.5%
- Solid Lubricant : White lubricating solids and PTFE
- Copper Corrosion (IP112) : Negative
- Water Washout (ASTM D1264) @ 38 oC : < 1% max
- Dynamic Corrosion Resistance (EMCOR) (IP 220) : 0:0
- Shell Four Ball (IP239) Weld Load : 200kg
- dN Factor : 400000
- Operating Temperature Range : -50oC to +165oC
- Packaging : 400g cartridge
All ingredients are FDA listed. Ambergrease FG1 is NSF H1 registered and meets the USDA 1998 H1 Guidelines (This product contains no genetically modified ingredients). Based upon the present state of our knowledge and information received from our suppliers' evaluation of this product indicates that it is free from nut oils and their derivatives.STORAGEThe product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.