FORMULA SIX is a multi-purpose - medium duty silicone mould release agent. It is based on silicons and has been formulated as a highly effective - general purpose release agent for all thermoplastics and many types of rubber.
APPLICATIONS
Provides a medium duty film for release of plastic and rubber parts in:
- Injection moulding
- Compression moulding
- Vacuum forming and Many other moulding and forming processes
Will not build up in the mould and helps to improve surface finish - reduce rejects and increases production.Fitted with 360 degree spray system for use at any angle - even upside down.Also useful as an anti-stick agent in the:
- Textiles
- Foam converting
- Printing and Shoe industries
N.B. Contains silicone so may be unsuitable where decorative work (e.g. painting - plating) is necessary on the moulded part. If a non-silicone product is required - use Formula Seven or Formula Four.Spray a light - even coating from 9 - 12 (25 - 30 cm) and re-apply as necessary
- Appearance : Clear - colourless liquid
- Odour : Hydrocarbon
- SG @ 25C : 0.723
- Pressure @ 25C : 3.5 Bar
- Discharge rate : 0.8 g/sec
- Temperature range : Operational up to 200C
- Solubility : Soluble in solvents - insoluble in water
- Flammability : Classified as extremely flammable under current EC Regulations
- Flashpoint : Not applicable in sealed aerosol
- Packaging : 25 litres
The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.