PUR 400 is a silicone release agent specifically formulated to provide a fine release film for use with integral skin and elastomeric polyurethanes.
ADVANTAGES
- High-gloss - even finish
- Fine spray pattern
- Low solvent odour
- No build-up on mould surface
- Fast evaporating solvent carriers - Suitable for low temperature moulding
- No streaks on moulded components
- Operational up to 200C
APPLICATIONS
Ensures quick and easy release of integral skin and elastomeric polyurethanes in injection moulding and other forming processes. Contains silicone so may not be suitable where decorative work (e.g. painting plating) is necessary on the moulded part. Spray a light - even coating from 9 - 12 inches (25 - 30cm) and re-apply as necessary
- Appearance : Clear - colourless liquid
- Odour : Negligible
- SG @ 25°C : 0.762
- Pressure @ 25°C : 4 Bar
- Discharge rate : 0.9 g/sec
- Temperature range : Operational up to 200°C
- Solubility : Soluble in solvents - insoluble in water
- Flammability : Classified as extremely flammable under current EC regulations
- Flashpoint : Not applicable in sealed aerosol
- Packaging : 500ml aerosol
STORAGE
The product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.