POLYMER REMOVER is an extremely effective and powerful solvent blend - which has been developed for use on heavily soiled moulds and dies to remove a variety of moulding deposits.
APPLICATIONS
Will assist in the removal of plastics - rubbers and resin deposits - including:
- ABS
- Acetals
- Acrylates
- PVC
- Epoxy Resins (uncured)
- Nylons
- Polyamides
- Polystyrenes
- Polyurethanes
- Rubbers
- Silicone Resins
Also effective on other materials such as cellulose resins and alkyd resins. The product offers a controlled rate of evaporation for maximum efficiency. After cleaning - any residual solvent will evaporate to leave the surface clean and dry.Apply directly onto the soiling and wipe away. For extremely heavy contamination or stubborn deposits - allow the solvent to penetrate thoroughly before wiping the surface clean.
SPECIFICATIONS
- Appearance : Clear - colourless liquid
- Odour : Characteristic hydrocarbon
- SG@25°C: 0.823
- Pressure @25°C: 4 bar
- Discharge rate : 1.8g/sec
- Solubility : Soluble in water and most organic solvents
- Flammability : Classified as extremely flammable under CHIP Regulations
- Packaging : Non-aerosol 5 litres
STORAGE
The product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50°C- away from direct heat and naked flame.