A highly effective, non-silicone mould release agent based on a blend of waxes and hydrocarbon solvents. It has been specifically formulated to facilitate release of high density rigid polyurethanes and refrigeration/insulation foams.
Advantages
- Low mould build-up
- Reduced post moulding costs (no degreasing needed)
- Will allow post painting in-mould painting and adhesion of secondary coverings
- Easily removed using Ambersil Heavy Duty Mould Cleaner or Ambersil Mould Cleaner (for resin tooling)
Applications
The product ensures a quick & easy release of high density rigid polyurethane foams & refrigeration foams from aluminium, steel and silicone rubber moulds. Shake well before use. Apply an even coating to the mould using a spray or paintbrush. Apply two coats onto new or clean moulds before first moulding and then re-apply as necessary. Due to the specially selected blend of waxes build up on the mould surfaces is minimal - however it is recommended that moulds are cleaned regularly for best results.
Ambersil Mould Cleaner is the ideal product for fast - efficient removal of any wax deposits. PUR300 is completely free of silicons and will therefore allow decorative treatment (e.g. staining - painting) of the moulded part.
- Appearance: Milky suspension
- Odour: Hydrocarbon
- SG @ 25°C: 0.72
- Temperature range: Release film to 100°C
- Solubility: Soluble in solvents - insoluble in water
- Viscosity: Thinner than water
- Compatibility: Safe on metals and most synthetic materials
- Flammability: Classified as highly flammable under current EC Regulations
- Flashpoint: < -4°C
- Auto-ignition temperature: > 200°C
Storage
The product may be stored at normal ambient temperatures and has a shelf life of not less than 12 months with correct storage.