BLUE ADHESIVE LUBRICANT is a multipurpose lubricant with a temporary blue tint to assist with application coverage.The product:
- Exhibits strong attachment to substrates
- Is non-dripping
- Has good penetrating properties
- Is resistant to high pressure and Excellent water repellent
BENEFITS
- Excellent water resistance
- Functional over a wide temperature range
- Produces a very low coefficient of friction
- Reduces stick slip problems
- Provides long lasting lubrication
- Safe on all metal surfaces - does not stain
- Safe on most rubbers - plastics and coatings
Test on sensitive or stressed materials before use
TYPICAL USES
- Engine assembly
- Handling equipment
- Chains
- Bearings
- Railroad equipment
- Agricultural equipment
- Surface treatment
- Guide rails
- Hinges
- Cables
- Physical Appearance : Viscous liquid
- Colour : Blue
- Odour : Solvent
- Flash Point : < 0oC
- Density Active Product : 0.87 (@25oC)
- Flash Point Active Product : 230oC (Open Cup)
- Dynamic Viscosity Active Product : 1894 mPa.s (@40oC)
- Operating Temperature :-12oC to +150oC (180oC intermittent)
- Packaging : 400ml aerosol
APPLICATION METHOD- Apply to a clean - dry surface
- Apply a thin even film
- Allow a few minutes for good penetration
- Do not use on energised equipment
- Do not mix with other lubricants
- To remove residues or excess product - use a solvent based Ambersil cleaner
STORAGE
The product may be stored at normal ambient temperatures and has a shelf life of 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.