PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool. Also available as Internal and External Control, Shut-Off versions.
- Accuracy: +5%
- Operates between: 295.00 - 1475.00 lbf.ft 400.00 - 2000.00 N.M
- Non impacting - low vibration levels make these tools comfortable and safe to use.
- Square drive is quickly and easily replaceable.
- 'Soft Start' trigger controls / aids socket location and allows gradual and safe reaction location.
- For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
- Light weight - single direction 2000 N.M stall tool weighs just 6.2 kg.
- On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
- Fast - 1000 N.M version has a free speed of 140 rpm for rapid bolt run-down.
- Square Size: 1inch
- Max Air Pressure: 6.3 bar
- Air Consumption: 19 litres/sec (40 CFM)
- Tool Weight: 6.5 kg
- Reaction Plate Weight: 0.7 kg
- Free Speed: 58 rpm